Sharp MX-M365N User Manual page 1286

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
TRANSMISSION DOES NOT BEGIN AT THE
SPECIFIED TIME
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Point to check
Is the machine's clock se
t to the correct time?
Is a transmission in progr
ess?
1286 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Set the clock to the correct time.
"Setting mode" → [System Settings] → [Default Settings] → [Clock A
djust]
If another transmission is in progress when the specified time arrives, th
e timer operation will begin after that transmission is finished.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Solution
3/17/2016 7:14 AM