Sharp MX-M365N User Manual page 1165

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
normal SMTP.
SMTP Authentication
Carries out the SMTP server authentication.
If you use the Kerberos authentication, set the KDC server, port number, and realm on the
Kerberos authentication settings page.
User Name
Enter the user name.
Password
Enter the password.
To change the password, set [Change Password] to
POP before SMTP
If is set, you are authenticated to the POP server before using the SMTP
communication.
POP3 Server: Enter the IP address or the host name of the secondary SMTP server.
Port Number: Enter the POP3 port number for POP before SMTP communication.
The default setting is port 110.
POP Authentication: If
used for authentication to the POP3 server.
User Name: Enter the user name for POP before SMTP communication.
Password: Enter the password required for POP before SMTP communication. To
change the password, set [Change Password] to
Enable SSL: If set to
communication by STLS command is enabled.
This requires the server to support the POP over SSL communication or the STLS
command.
To allow SSL communication, set the "Port Number" to the POP over SSL
communication port number.
To allow POP over TLS communication, set the "Port Number" to the same port
number as for the normal POP3 communication.
Connection Test
Tap the [Execute] button to test the connection to the SMTP server.
1165 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
is set, the authentication protocol (including APOP) is
, the POP over SSL communication or the POP over TLS
.
.
3/17/2016 7:14 AM