Sharp MX-M365N User Manual page 1284

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
THE TRANSMITTED FAX PRINTS OUT BLANK
AT THE RECEIVING SIDE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Is the original placed face up or f
ace down correctly?
If the receiving machine is using
thermal paper, was the thermal p
aper loaded with the wrong side
out?
1284 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Place the original again in the correct orientation, and res
end.
When using the document glass, the original must be placed face
down. When using the automatic document feeder, the original m
ust be placed face up. Place the original correctly and send the f
ax again.
Check with the operator of the other machine.
Solution
3/17/2016 7:14 AM