Sharp MX-M365N User Manual page 1106

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Auto
Post Script
PCL
Enable Network Port
Enables printing from the network port.
Network Port Emulation Switching
This setting is used to select the emulated printer language when the machine is
connected by a network port.
The following settings can be configured.
Auto
Post Script
PCL
Port Switching Method
Selects when port switching takes place.
Switch at End of Job
The port changes to auto selection when printing ends.
1106 of 1441
The settings are the same as those of
Unless printer errors occur frequently, it is recommended that you use the factory
default setting "Auto".
The settings are the same as those of
Unless printer errors occur frequently, it is recommended that you use the factory
default setting "Auto".
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"Network Port Emulation Switching".
"USB Port Emulation Switching".
3/17/2016 7:14 AM