Sharp MX-M365N User Manual page 1093

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Disabling of Punch
This setting is used to prohibit the use of punch, such as when the punch module of
finisher or saddle finisher malfunctions.
Auto Paper Selection Setting
The paper types
Select one of the following settings:
Plain Paper
Plain and Recycle Paper
Recycle Paper
The Auto Paper Selection function will not select any paper types other than the paper
types specified with this setting.
* The paper type set for each paper tray by selecting [System Settings] in "Setting
mode" → [Paper Tray Settings].
Tandem Connection Setting
When two machines are used as network printers using TCP/IP protocol, use this setting
to configure the port number and IP address of the machine used as the tandem slave
machine.
Disabling of Master Machine Mode
To prohibit tandem transmission, enable this setting. (Normally this setting is not
necessary.)
1093 of 1441
*
that the Auto Paper Selection function will select can be specified.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM