Sharp MX-M365N User Manual page 1209

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
E-MAIL PRINT SETTINGS
When an e-mail is sent to the address of this machine, a file attached to this mail is
printed out.
E-mail Print
POP3 Server
Port Number
POP Authentication
User Name
Password
Check Interval
Enable SSL
Connection Test
1209 of 1441
Item
Select this option to use the E-mail printing.
Enter the IP address or host name of the POP3 server.
Enter the port number of the POP3 server. The default setting is port
110.
The authentication protocol (including APOP) is used for authenticati
on to the POP3 server.
Enter the user name. The special user account is required for e-mail
printing.
Enter the password. To change the password, select [Change Passw
ord]
Enter the polling interval for the POP3 server. The default setting is fi
ve minutes.
If set to
S communication by STLS command is enabled. This requires the ser
ver to support the POP over SSL communication or the STLS comm
and.
To allow the POP over SSL communication, set the "Port Number" t
o the POP over SSL communication port number.
To allow POP over TLS communication, set the "Port Number" to th
e same port number as for the normal POP3 communication.
Tap the [Execute] button to test the connection to the POP3 server.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
Description
and enter the new password in the text box.
, the POP over SSL communication or the POP over TL
3/17/2016 7:14 AM