Sharp MX-M365N User Manual page 1251

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Speaker Settings
Use these settings to set the sound heard from the speaker for the Speaker, Ringer
Volume, Line Monitor, Fax Receive Complete Signal, Fax Send Complete Signal, and Fax
Communication Error Signal. For the Fax Receive Complete Signal, the Fax Send Complete
Signal, and the Fax Communication Error Signal, the Tone Pattern and Transmission
Complete Sound Time Setting can be selected in addition to the volume.
Check on Setup Sounds
Checks the selected tone pattern and volume.
Remote Reception Number Setting
You can set the machine to the fax reception mode by entering a one-digit number from
the connected extension telephone and by tapping the
called the Remote Reception number, and it can be between 0 and 9.
Original Print on Transaction Report
When a transaction report is printed, this is used to print part of the first page of the
transmitted original on the transaction report. Select one of the settings below.
Print Out All Report
Print Out Error Report Only
Do not Print
This setting will not be effective if the next
set to "Do not Print".
Transaction Report Print Select Setting
Selects whether or not a transaction report will be printed, and if printed, the condition for
being printed. Select a setting for each of the following operations:
Single Sending
Print Out All Report
Print Out Error Report Only
Do not Print
Broadcasting
Print Out All Report
1251 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
key. This one-digit number is
"Transaction Report Print Select Setting" is
3/17/2016 7:14 AM