Sharp MX-M365N User Manual page 1269

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
PRINTING DOES NOT TAKE PLACE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Point to check
Is your PC connected corr
ectly to the machine?
Is the machine connected
to the same network (LAN,
etc.) as your PC?
Is the IP address selected
correctly?
(Windows)
Are you using a printer por
t created using Standard T
1269 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Make sure that the cable is connected securely to the LAN con
nector or the USB port of your PC and that of the machine.
If you are connected to a network, make sure that the LAN cable is se
curely connected to the hub as well.
- "SIDE AND
The machine must be connected to the same network as your P
C.
If you do not know which network the machine is connected to, ask th
e network administrator.
Check the IP address setting.
If the machine does not have a permanent IP address (the machine rec
eives an IP address from a DHCP server), printing will not be possible if
the IP address changes.
Print the "All Custom Setting List" in the setting mode and check the I
P address of the machine. If the IP address has changed, change the p
ort setting for the printer driver.
"Setting mode" → [List Print (User)] → [All Custom Setting List]
See: Software Setup Guide
If the IP address changes frequently, it is recommended that a permane
nt IP address be assigned to the machine.
"Setting mode" → [Network Settings]
Check the PC settings.
When a port created with Standard TCP/IP Port in Windows is used an
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Solution
BACK" in OPERATIONS COMMON TO ALL MODES
3/17/2016 7:14 AM