Sharp MX-M365N User Manual page 1278

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
PART OF THE IMAGE IS CUT OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Does the paper size specified by the job matc
h the size of paper loaded into the tray?
Is the print orientation setting (portrait or land
scape) correct?
Are the margins set correctly in the layout se
ttings of the application?
1278 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Solution
Make sure that the paper size setting matches
the size of paper loaded into the tray.
Windows: The setting is selected in the [Paper Sele
ct] tab of the printer driver.
If [Fit To Paper Size] is selected, check the loaded p
aper and the paper size setting.
Macintosh: The setting is selected in the [Page Set
up] menu.
Set the print orientation to match the image.
Windows: The setting is selected in the [Main] tab of
the printer driver.
Macintosh: The setting is selected in the [Page Set
up] menu.
Select an appropriate paper size and margins in
the layout settings of the application.
If the edge of the image extends outside the printabl
e area of the machine, the edge will be cut off.
3/17/2016 7:14 AM