Sharp MX-M365N User Manual page 1295

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
NO SOUND IS HEARD
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Ringer Volume
Line Monitor
Fax Receive Complete Signal
Fax Send Complete Signal
Fax Communication Error Signal
Has the ringer volume been set t
o [None] in the setting mode?
1295 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. After the main power indicator
Ask your administrator to set the volumes in [Speaker Set
tings] to other than [None].
"Setting mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Default Settings] → [Speaker Settings]
"position. Wait at least 10 seconds
Solution
3/17/2016 7:14 AM