Sharp MX-M365N User Manual page 1097

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
INITIAL STATUS SETTINGS
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just
the copy function).
The copier settings are reset to the initial state when the [Power] button is turned on,
when the [CA] key is tapped, or when the auto clear interval has elapsed. These settings
are used to change the default settings for copy mode.
The following settings can be changed:
Paper Tray
Exposure Type
Copy Ratio
2-Sided Copy
Output
Offset
Return to the Defaults
1097 of 1441
Item
Specify the paper tray that is selected by default.
Configure default exposure mode settings.
Specify the copy ratio that is selected by default.
Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex fun
ction to any setting other than "1-Side to 1-Side" and the duplex fu
nction or automatic document feeder fails or is disabled, the setting w
ill revert to "1-Side to 1-Side".
Set the print output method and output tray that are selected by defa
ult.
Set whether or not offset is performed in the default settings.
This returns all items to the factory default settings.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
Description
3/17/2016 7:14 AM