Sharp MX-M365N User Manual page 1166

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
SNMP
SNMPv1 Settings
SNMP v1 Settings
Set this option to use the SNMPv1 settings.
Access Method
Set an access method.
GET Community
Enter the GET community name to fetch the device information using SNMP.
SET Community
Enter the SET community name required for SNMP setting.
Change SET Community
To change the SET community, set
TRAP Community
Enter the community name to be used for the SNMP TRAP sent from the device.
TRAP Target Address
Enter the IP address of the destination computer for SNMP TRAP communication.
SNMP v3 Settings
SNMP v3 Settings
Set this option to use the SNMPv3 settings.
User Name
Enter the user name.
Authentication Key
Select an algorithm, enter the authentication key.
1166 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
.
3/17/2016 7:14 AM