Sharp MX-M365N User Manual page 1246

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Memory Box Name
Sub Address/Passcode
Items displayed when storing a confidential memory box
Print PIN
Items displayed when storing a relay broadcast memory box
Recipients
1246 of 1441
Enter a name (maximum of 18 characters) for the memory box.
Enter a sub-address and passcode. A maximum of 20 digits can be en
tered for each sub-address and passcode.
Separate a sub-address and passcode by a slash ("/").
Set a "Print PIN" for confidential reception. Enter a 4-digit number.
Select the end recipients of the relay broadcast. Select the recipient
s from the address book.
When programming a new memory box, a sub-address that is already programmed for
another box cannot be used. However, the same passcode can be used for more
than one memory box.
[ ] and [#] cannot be used in a sub-address.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
program in the memory box are necessary for the other
machine to send a fax to the machine by F-code
confidential transmission.
Relay Broadcast: Store a memory box for F-code relay
broadcast transmission.
Up to 30 destinations can be stored to forward the
received data. The sub-address and passcode that you
program in the memory box are necessary for the other
machine to send a fax to the machine by F-code relay
request transmission.
Select the recipient from the address book: Selects an
address from the address book.
Destination Entry: An address that is not stored in the
address book can be directly entered. Enter the address in
the same way as when storing an address for a mode.
Address Review: This displays a list of the selected
recipients. Addresses can be deleted from this list if
needed.
3/17/2016 7:14 AM