Sharp MX-M365N User Manual page 1307

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
CANNOT WRITE TO THE USB MEMORY
DEVICE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Is the connected USB device re
cognized correctly?
1307 of 1441
(WHEN USING USB MEMORY SCAN)
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. After the main power indicator
Use [USB-Device Check] in the setting mode to check wh
ether or not the device is recognized.
"Setting mode" → [System Settings] → [USB-Device Check]
If it is not recognized, connect it once again.
"position. Wait at least 10 seconds
Solution
3/17/2016 7:14 AM