Sharp MX-M365N User Manual page 1272

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
TWO-SIDED PRINTING DOES NOT TAKE
PLACE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the "
and then turn the main power switch to the "
color changes to green, press the [POWER] button.
Does the paper type setting of the sel
ected tray specify a type of paper that
cannot be used for 2-sided printing?
Are you using a special size or type of
paper?
Have functions been disabled by the a
dministrator?
1272 of 1441
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
Point to check
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"position. Wait at least 10 seconds
"position. After the main power indicator
Solution
Check "Paper Tray Settings" in the setting mode.
If the [Disable Duplex] checkbox is
using that tray will not be possible. Change the paper type s
etting to a type that can be used for 2-sided printing.
"Setting mode" → [Paper Tray Settings] → [Tray Registra
tion]
For the paper types and sizes that can be used for t
wo-sided printing, see "SPECIFICATIONS" in Quick
Start Guide.
Check with your administrator.
Some functions may have been disabled in the setting mod
e. Check with your administrator.
When user authentication is enabled, the functions that yo
u can use may be restricted in your user settings. Check w
ith your administrator.
, two-sided printing
3/17/2016 7:14 AM