Sharp MX-M365N User Manual page 1100

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Disabling of Registration/Deletion of Program
This is used to prohibit the deletion and changing of copy settings stored in job programs.
Disabling of Bypass-Tray in Duplex Copy
Disables the use of the bypass tray when making 2-sided copies.
The bypass tray is often used to feed label sheets, transparency film, and other special
media for which 2-sided copying is prohibited. If a sheet of one of these special media
enters the reversing unit, a misfeed or damage to the unit may result. If special media for
which 2-sided copying is prohibited is often used, it is recommended that you enable this
setting.
Disabling of Auto Paper Selection
Disables the Auto Paper Selection function.
When this setting is enabled, automatic selection of paper that is the same size as the
original on the document glass or in the automatic document feeder does not take place.
Auto Selection Setting of Tray that is Supplied the Paper
When this setting is enabled and paper is loaded into a tray while the machine is on
standby in copy mode, that tray is automatically selected.
Disabling Registration of Custom Image
Disables storage of a custom image.
1100 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM