Sharp MX-M365N User Manual page 1254

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Printing Page Number at Receiver
When the transmitted image is printed by the receiving machine, the page number can be
added to the top of each printed page.
Sender/Destination Name Change
Allows you to change the destination name and sender fax number if necessary.
Date/Own Number Print Position Setting
This setting determines the position of the date and sender information printed at the top
of faxes by the receiving machine. To have the information printed outside the transmitted
document image, tap the [Outside the Original Image] key. To have the information printed
inside the document image, tap the [Inside the Original Image] key.
For more information on the print position, see
TO FAXES (Fax own number
Recall in Case of Line Busy
This program is used to set the number of recall attempts and the interval between recall
attempts when a transmission is not successful due to the line being busy or other reason.
Number of Times to Recall When Line is Busy
This setting specifies whether or not recalling is performed when the line is busy. During
recalling, you can set the number of recall attempts. Any number from 1 to 15 can be
selected.
Interval to Wait Between Recall Attempts (min.) When Line is Busy
The interval between recall attempts can be set. Any number of minutes from 1 to 15 can
be selected.
Recall in Case of Communication Error
This determines how many times the machine will automatically attempt the call again if a
fax transmission fails due to a communication error.
Number of Times to Recall in Case of Error
Specify how many times the machine will attempt the call again when a communication
1254 of 1441
sending)" in "FAX".
When this setting is enabled, note that the machine will not attempt the call again when
manual transmission or direct transmission is used.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
"ADDING YOUR SENDER INFORMATION
3/17/2016 7:14 AM