Sharp MX-M365N User Manual page 1125

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
fax transmission fails due to a communication error.
Number of Times to Recall in Case of Error
Specify how many times the machine will recall when a communication error occurs.
During recalling, you can set the number of recall attempts.
Any number from 0 to 15 can be selected.
Interval to Wait Between Recall Attempts (min.) in Case of Error
The interval between recall attempts can be set. Any number of minutes from 1 to 15 can
be selected.
Receive Settings
Configures the settings for Internet fax.
Auto Receive Reduce Setting
When a fax is received that includes printed information such as the sender's name and
address, the received image is slightly larger than the standard size. This setting is used to
automatically reduce the image to fit the standard size.
Duplex Reception Setting
This is used to have received faxes printed on both sides of the paper.
When this setting is enabled and a fax consisting of 2 or more pages is received (the pages
must be the same size), the pages are printed on both sides of the paper.
Set Address for Data Forwarding
When the machine cannot print a received fax, the fax can be forwarded to another
machine. This setting is used to configure the address of the other machine.
1125 of 1441
If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be
cut off.
However, the image will be clearer because it will be printed at the same size as the original.
Standard sizes are sizes such as 8-1/2" x 11" and 8-1/2" x 5-1/2" (A4 and B5).
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM