Sharp MX-M365N User Manual page 1126

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Forwarding to
Enter the forwarding address (maximum of 64 characters).
Direct SMTP
Select this to enable forwarding when direct SMTP is used.
Add Hostname or IP Address Too
Select this to separately enter a host name or IP address.
Hostname or IP Address
Use this setting when "Add Hostname or IP Address." is enabled. Enter the host name or
IP address (maximum of 64 characters).
Receiving Date & Time Print
Enable this setting to have the date and time of reception printed.
Select [Inside the Received Image] or [Outside the Received Image] for the position where
the date and time is printed.
When [Inside the Received Image] is selected, the date and time of reception is printed on
the received image.
When [Outside the Received Image] is selected, the received image is reduced and the
date and time of reception is printed in the blank area that results.
A3 RX Reduce
When an A3 size fax is received, this function reduces the fax to ledger (11" x 17") size.
POP3 Communication Timeout Setting
The duration of time the machine waits until stopping reception can be set from 30 to 300
seconds in increments of 30 seconds if no response is received from the mail server
(POP3 server).
1126 of 1441
Multiple forwarding addresses cannot be stored.
The [Outside the Received Image] cannot be selected for the reception date and time print
setting if "Auto Receive Reduce
When this setting is enabled, ledger (11" x 17") size faxes are also reduced.
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
Setting" is not enabled.
3/17/2016 7:14 AM