Sharp MX-M365N User Manual page 1225

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Port Number
POP Authentication
User Name
Password
Check Interval
Enable SSL
Connection Test
Alerts Message
Selects the E-mail Alert function settings.
The E-mail Alert function can report a trouble of the machine to the administrator or
dealer using e-mail.
Sets the E-mail status address list 1, E-mail status address list 2, and E-mail status dealer
address list separately.
E-mail Address
Enter the destination E-mail address for alert message transmission. You can enter
multiple addresses by separating them by a semicolon or colon.
Example: aaa@abc.jp,bbb@xyz.com
1225 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
Enter the port number of the POP3 server. The default setting is port
110.
The authentication protocol (including APOP) is used for authenticati
on to the POP3 server.
Enter the user name. The special user account is required for bi-dire
ctional e-mail status transmission.
Enter the password.
To change the password, set [Change Password] to
Enter the polling interval for the POP3 server. The default setting is fi
ve minutes.
Allows the POP over SSL communication or the POP over TLS c
ommunication by STLS command.
This requires the server to support the POP over SSL communicatio
n or the STLS command.
To allow SSL communication, set the "Port Number" to the POP ove
r SSL communication port number.
To allow POP over TLS communication, set the "Port Number" to th
e same port number as for the normal POP3 communication.
Tap the [Execute] button to test the connection to the POP3 server.
.
3/17/2016 7:14 AM