Sharp MX-M365N User Manual page 1164

USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ...
Primary Server
Enter the IP address of primary WINS server.
Secondary Server
Enter the IP address of secondary WINS server.
Scope ID
Enter the scope ID.
SMTP
SMTP Settings
Primary Server
Enter the IP address or the host name of the primary SMTP server.
Secondary Server
Enter the IP address or the host name of the secondary SMTP server.
Port Number
Enter a port number. The default setting is port 25.
Timeout
Enter a timeout. The default setting is 20 seconds. This value is used for connection to the
SMTP server and for data transmission according to the e-mail system specifications.
Source Address
If data transmission has failed, the undelivered e-mail may be returned from the server.
Enter an e-mail address (a single address only) to receive such undelivered mails.
Usually, enter the e-mail address of system administrator.
Enable SSL
If the SSL is enabled, the SMTP-over-TLS encryption communication can be used by
STARTTLS command.
This requires the server to support the STARTTLS command.
To allow SSL communication, set the "Port Number" to the same port number as the
1164 of 1441
http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
3/17/2016 7:14 AM