This Is How You Generated A New License Key - Siemens sinumerik 828d Service Manual

Service cases - software
3.6 Licensing
3. Press the "Missing lic./opt." softkey in order to display all options that are licensed. In the
4. Press the softkey "Set option according to license", to activate all of the options contained
5. To activate new selected options, press the "Reset (po)" softkey. A safety prompt
6. Press the "OK" softkey to trigger a warm restart.
7. Press the "Cancel" softkey to cancel the process.
3.6.4

This is how you generated a new license key

Assigning the license to hardware
In order to simplify licensing for the technician, licenses are assigned to the hardware in a
Standard Web Browser using the Web License Manager .
To conclude the assignment, the license key must be entered manually on the control via the
user interface.
As a consequence, a valid license key can be generated at any time worldwide for options
that have been additionally purchased.
58
"Set" column, you can deselect the options that you do not require.
Figure 3-4 Licensing (example)
in the license key. Confirm the following confirmation prompt with "OK".
appears.
- OR -
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0