Status Displays, Mcp 483C Pn - Siemens sinumerik 828d Service Manual

Service cases - hardware
4.4 Machine control panels
DIP switch S2
Figure 4-9
Switch S2 defines the IP address of the machine control panel:
1
on
For SINUMERIK 828D, the IP address = 192.168.214.64 must always be assigned to the MCP.
4.4.4

Status displays, MCP 483C PN

LED status displays
For the MCP 483C PN there are 3 LEDs in a row (H1 - H3), which provide information about
the module state:
Figure 4-10
96
Switch S2
2 3 4 5
off on off off
Status displays
6 7 8 9
on
off off off
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
10 Device name
on
mcp-pn64
Hardware and Software