Siemens sinumerik 828d Service Manual page 26

Service cases - software
3.1 Backing up user data
3. Using the arrow key, select the menu item "Reload saved user data".
4. Confirm that the backup is loaded by pressing the key <INPUT>.
5. Confirm the confirmation prompt by pressing the <INPUT> key.
Note
Booting
If data is lost from the buffer memory, the data saved in the permanent memory will
automatically be reloaded to the memory at POWER ON.
If the control boots with the backed-up data, the following message is displayed:
"4062 Data backup copy has been loaded".
26
Are you sure you want to reload saved user data?"
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0