Siemens sinumerik 828d Service Manual page 195
Hide thumbs
Also See for sinumerik 828d:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Installing
Procedure:
1. Now install the new SME125 module.
2. Screw on the protective conductor connection.
3. Reconnect the temperature sensor at X200.
4. Reconnect the encoder connecting cable.
5. Connect the DRIVE-CLiQ cable.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
CAUTION
The maximum DRIVE-CLiQ cable length is 100 m.
The maximum encoder cable length is 3 m.
In order to guarantee the degree of protection, all of the plug connectors must be
correctly screwed and snapped into place.
Service cases - hardware
4.15 Sensor Modules External
195
Advertisement
Table of Contents
