Dmc20 Connections; This Is How You Remove A Dmc20 - Siemens sinumerik 828d Service Manual

Service cases - hardware
4.17 Hub Modules
4.17.2

DMC20 connections

Connections
Figure 4-49 Connections DMC20
4.17.3

This is how you remove a DMC20

Overview
The activities that must be taken into account when replacing a DMC20 are subsequently
described.
If a DMC20 has a hardware defect, then it must be replaced by an identical module.
Preconditions:
● The module is defective and must be replaced.
● The control cabinet is in a no-voltage condition, all of the connectors and cables are
202
labeled.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0