This Is How You Clean The Heat Sink Of The S120 Combi - Siemens sinumerik 828d Service Manual
Hide thumbs
Also See for sinumerik 828d:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
4.8.12
This is how you clean the heat sink of the S120 Combi
Cleaning the heat sink
The S120 Combi heat sink should be cleaned at regular intervals using either compressed
air or high-pressure water jets. To clean the heat sink, the air baffle plate at the rear of the
S120 Combi must be removed.
Procedure:
1. The screws are accessible from the rear.
2. To remove the air baffle plate on the S120 Combi, release the fixing screws through the
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
holes in the reinforcement plates.
Service cases - hardware
4.8 SINAMICS S120 Combi
141
Advertisement
Table of Contents
