Siemens sinumerik 828d Service Manual page 67

3. Press the "Logbook" softkey.
4. Press the "New entry" softkey in order to make an entry in the logbook.
5. Press the "OK" softkey to save an entry in the logbook.
For the following activities, two additional softkeys are available, which generate pre-
configured logbook entries:
NOTICE
Once saved, data can no longer be changed.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
Complete the fields for the new logbook entry:
1st commissioning completed
2nd commissioning completed
Service cases - software
3.7 Enter the final end user data (EUNA)
67