Siemens sinumerik 828d Service Manual page 70

Service cases - software
3.7 Enter the final end user data (EUNA)
This means that the service organization has the possibility of obtaining a profile about the
history of the control without having to go to the machine. Therefore, service can be more
effectively carried-out as all of the relevant information is available.
Sending the end user final destination data
Preconditions:
● The commissioning status is saved in the logbook.
● The machine identity has been entered/updated in the machine.
● The machine identity was saved and is available on the PC/PG.
● The PC/PG is connected with the Internet.
Please proceed as follows:
1. Open the Internet Browser on your PC/PG.
2. Connection with EUNA (http://www.siemens.com/sinumerik/register).
3. Select a language and enter an e-mail address:
70
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0