Siemens sinumerik 828d Service Manual page 156
Hide thumbs
Also See for sinumerik 828d:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Service cases - hardware
4.10 Single Motor Modules
4. Release the Torx screws and connect the DC link busbar.
5. Tighten the Torx screws of the DC link busbars, observe the correct sequence.
6. Place the red jumper plug on the electronics busbar until it clicks into place.
7. Place the 24 V terminal adapter on the electronics power supply busbar until it clicks into
8. Close the protective cover of the DC link voltage.
156
place.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
Advertisement
Table of Contents
