K01 To K05, Safety License For 1 To 5 Axes - Siemens SINAMICS S120 Manual

9.10

K01 to K05, safety license for 1 to 5 axes

Availability of option
This option is available for the following S120 Cabinet Modules:
● Motor Modules
Description
The Safety Integrated Basic functions do not require a license. A license is, however,
required for each axis with safety functions in the case of Safety Integrated Extended
functions. It is irrelevant which safety functions are used and how many.
In this case, option K01 is for 1 axis, option K02 for 2 axes etc. - up to option K05 for 5 axes.
● K01: Safety license for 1 axis
● K02: Safety license for 2 axes
● K03: Safety license for 3 axes
● K04: Safety license for 4 axes
● K05: Safety license for 5 axes
Note
Presently, a maximum of 5 safety axes with Safety Integrated Extended functions are
possible on a Control Unit CU320-2.
Licenses
The required licenses can be ordered via options K01 - K05 together with the CompactFlash
card.
Retroactive licensing is executed on the Internet via the "WEB License Manager" by
generating a license key:
http://www.siemens.com/automation/license
Note
The generation of the license key is described in detail in the SINAMICS S120 Function
Manual, Chapter "Basics of the drive system" under "Licensing".
Activation
The associated license key is entered into parameter p9920 in the ASCII code. The license
key is activated by parameter p9921 = 1.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
9.10 K01 to K05, safety license for 1 to 5 axes
Options
357