Service cases - hardware
4.16 Terminal Modules
4.16.2
TM54F connections
Connections
Figure 4-47
TM54F connections
4.16.3
This is how you remove an TM54F
Overview
The activities that must be taken into account when replacing an TM54F are subsequently
described.
If a TM54F has a hardware defect, then it must be replaced by an identical module.
Preconditions:
● The module is defective and must be replaced.
● The control cabinet is in a no-voltage condition, all of the connectors and cables are
198
labeled.
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0