This Is How You Mount A Dme20 - Siemens sinumerik 828d Service Manual
Hide thumbs
Also See for sinumerik 828d:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Service cases - hardware
4.17 Hub Modules
4.17.6
This is how you mount a DME20
Mounting
Procedure:
1. Place the drilling pattern on the mounting surface.
2. Drill the holes with Ø5.3 or M5 threads.
3. Tighten the component with a tightening torque of 6.0 Nm.
206
The mounting surfaces must be bare metal.
Figure 4-52
DME20 dimensions
Hardware and Software
Service Manual, 03/2011, 6FC5397-5DP40-0BA0
Advertisement
Table of Contents
