Mount The Oil Expansion Unit - Siemens SIMOGEAR BA 2030 Operating Instructions Manual

Commissioning

5.3 Mount the oil expansion unit

Gearbox in special mounting position
The gearbox is intended for a specific rotation angle and is delivered with the correct quantity
of oil for this purpose.
It is not possible to check the oil level. You will find information regarding oil quantity and
type of oil on the rating plate.
5.3 Mount the oil expansion unit
An oil expansion unit can be used depending on the power, drive speed, mounting position
and transmission ratio. The oil expansion unit is used to equalize changes in the oil volume
caused by temperature fluctuations in operation.
Before commissioning the gearbox, replace the screw plug with the oil expansion unit.
Oil expansion unit size 39 - 89
The unit is supplied as a mounting kit, and can be attached to the geared motor vertically or
at an angle.
①
②
③
Figure 5-2
48
Pressure relief valve
Unit
Screwed joint
Installing oil expansion unit size 39 - 89
④ Tube bend
⑤ Screwed connection
Operating Instructions, 07/2020, A5E50009094A/RS-AL
BA 2030 (2KJ4)