Points Of Interest - Standard Horizon CP300i Owner's Manual

4. Move the ShuttlePoint knob to highlight the desired Lake. Otherwise press [MENU] to
enter the desired Lake name. A window will be shown: move the ShuttlePoint knob to
highlight the edit of Lake name and press [ENT] to accept: another popup window will
appear displaying the distance and position of the Lake.
5. Press [ENT] to show the actual position of the Lake on the Chart page.
6. Press [CLR] twice to return your cursor to your vessel's position.
4.0.7

Points Of Interest

This feature is used to locate Points Of Interest nearest the position of your vessel.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight POINTS OF INTEREST and press [ENT] or
move the ShuttlePoint knob to the right.
3. A (Category) popup window will be shown with a list of Category types (i.e. attractions,
emergency, entertainment).
4. Move the ShuttlePoint knob to highlight the desired Category and press [ENT].
5. A (Type) popup window will be shown with a list of types.
6. Move the ShuttlePoint knob to highlight the desired Type and press [ENT].
7. A popup window will be shown with a list of nearest Points Of Interest that fall into the
Category and Type you have selected.
8. Move the ShuttlePoint knob up/down to highlight the desired Point Of Interest and press [ENT].
9. Another window will be shown with detailing the Point Of Interest information.
10. Press [CLR] to show the actual position of the Point Of Interest on the Chart page.
11. Press [CLR] again at any time to return your cursor to your vessel's position.
GPS Chart Plotters
Figure 4.0.6 - Find Lakes By Name
Figure 4.0.7 - Find Points Of Interest
Page 47