Canon IR3250 User Manual page 158

4
Press the [Original Frame Erase] key.
5
Enter the Original Frame Erase width using
the keypad or the [+] and [–] keys, then press
the [Next] key.
NOTE
• Press the [Adjust Each Dim.] key to set the erase
width for each side separately.
• Press the [Same Ratio] key to erase the same
amount on all sides of the frame.
• Set the erase width for [Adjust Each Dim.] from
1/8" to 15/16"(1mm to 50mm) and for [Same
Ratio] from 1/8" to 15/16"(1mm to 50mm) , in 1/
16" (1mm)increments.
Erasing Shadows and Frame Lines from Copies (Frame Erase) 3-19