Unloading Filament - Flashforge Dreamer Desktop 3D Printer User Manual

____________________________________________________________________________________________

Unloading filament:

1. Remove the lid of the Dreamer
2. From the main menu, press the right
icon labeled [ Tools
Select [ Filament ]
3.
Left ].
4. Wait for the extruder to heat up to the
operating temperature. The extruder
will alert you once it is at the operating
temperature. Unload the filament by
gently guiding it out of the extruder.
Dreamer User Guide |
].
and [Unload
www.ff3dp.com
22