Table of Contents
Advertisement
____________________________________________________________________________________________
3.1 Single & dual-extrusion print
Single-Extrusion Print
1.
Open
FlashPrint
2.
Click on
[ Load ]
3.
The object will then be shown on the screen.
4.
Click on the object and then click on
extruder
].
*Left extruder will be used for illustration purposes.
5.
Now the 3D model is ready to be created. Proceed to part C of this
chapter (page 47) to select your connectivity method for printing.
Dual-Extrusion Print
1.
Open
FlashPrint
2.
Press
[ Load ]
3.
The object will then be shown on the screen.
4.
Press
[ Load ]
5.
Click on the object and then click on
extruder
].
NOTE: one object is turned to green, that indicates it will be print wit the left
extruder.
6.
Now the 3D model is ready to be created. Proceed to part C to select
your connectivity method for printing.
Dreamer User Guide |
by double-clicking on the icon.
and choose an .stl file from hard drive.
by double-clicking on the icon.
and choose an .stl file from hard drive.
and choose another (or the same) file from hard drive.
www.ff3dp.com
[ Extruder
], select
[ Extruder
], select
[ Use left
[ Use left
38
Advertisement
Table of Contents
