Leveling The Build Plate - Flashforge Dreamer Desktop 3D Printer User Manual

____________________________________________________________________________________________

1.5 Leveling the Build Plate

A correctly leveled build plate will almost always guarantee a quality 3D
object. When printed objects have issues, the first step to diagnose is to
check and double-check to make sure the build plate is leveled. A general
rule of thumb is to leave a gap that is the thickness of a piece of paper.
However, for printing finer objects (150 micron and lower), please use a
feeler gauge to level the build plate as it requires a lesser gap between the
nozzle and the build plate.
The Dreamer utilizes a three-point leveling system for its build plate. At
the bottom of the build plate, there is one spring-loaded knob in the front
and two in the back. Tightening the screw will create a bigger gap between
the build plate and the nozzle while loosening it will create lesser gap.
1. From the main menu, select
[Tools] and [Level]. The extruder
and the build plate will begin to
move to the starting position.
2. Take out the leveling card
Dreamer User Guide |
(QR-Code for leveling video can be
scanned)
www.ff3dp.com
23