Loading And Unloading Filament - Flashforge Dreamer Desktop 3D Printer User Manual

____________________________________________________________________________________________

1.4 Loading and Unloading Filament

Filament must pass through the extruder and into the heating block in order
to be melted. In this user guide, we will demonstrate loading and unloading
filament using the left side extruder.
Loading filament:
1. Remove the lid of the Dreamer
2. From the main menu, press the right
icon labeled [ Tools
3.Select [ Filament ]
Left ].
Dreamer User Guide |
].
and [ Load
www.ff3dp.com
20