Table of Contents
Advertisement
____________________________________________________________________________________________
Chapter 3. First Print
This chapter will provide a step-by-step guide on turning a 3D model into a
physical reality. Before proceeding, it is recommended that you go over
prior chapters on loading/unloading filament, leveling the build plate, and
the functions and capabilities of FlashPrint.
There are two modes of printing: single-extrusion and dual-extrusion. With
single extrusion, you can choose the print head to use for making the print.
Dual extrusion is useful if you want to print dual colors or complex models
that require supporting material.
There are three connection methods in order to print using the Dreamer. All
methods, which include USB, SD card, and Wi-Fi are covered in this
chapter.
37
Dreamer User Guide |
www.ff3dp.com
Advertisement
Table of Contents
