Flashforge Dreamer Desktop 3D Printer User Manual page 11

____________________________________________________________________________________________
In the Expert Kit, you can find a
Carving Knife, a Scraper, Tweezers,
a Sensor line
What's more. a SD card
screws, Wrenches
4.The Dreamer will have an accessory
box on top of it, which will house the
extruder set. Remove the box and the
foam pad from the Dreamer, and gently
lay the extruder set on the Dreamer
build plate.
Inside the accessory box, you will find
an SD card, a side fan
pieces of removable side
5. There are two Build sheets
leveling sheet used for printing and
leveling.
Dreamer User Guide |
and a Screw Box.
and some
in the Box.
duct, and
panels.
and
www.ff3dp.com
two
one
11