Flashforge DREAMER Quick Start Manual
  1. Manuals
  2. Brands
  3. Flashforge Manuals
  4. 3D Printers
  5. DREAMER
  6. Quick start manual

Flashforge DREAMER Quick Start Manual

Hide thumbs Also See for DREAMER:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Start Manual
Quick Start Guide
1. Do not peel the yellow film from the build plate. It is heat-resistant tape, which makes objects stick to the build plate easily.
2. Do not remove the wrapping around the nozzle. It consists of ceramic fiber and heat-resistant tape that help to keep the nozzle
Caution
at a constant temperature so as to extrude the filament fluently.
3. If print with PLA filament, please remove the lid and open the front door to ventilate for a better printing performance.
1. High Temperature! Platform may have been heated before; make sure it has cooled down before inner operation.
Warning
2. Loose clothes, jewelry and long hair can be caught in moving parts. Please keep away from them.
This guide only applies to Dreamer 3D printer of Flashforge

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DREAMER and is the answer not in the manual?

Questions and answers

Related Manuals for Flashforge DREAMER

Summary of Contents for Flashforge DREAMER

  • Page 1 1. High Temperature! Platform may have been heated before; make sure it has cooled down before inner operation. Warning 2. Loose clothes, jewelry and long hair can be caught in moving parts. Please keep away from them. This guide only applies to Dreamer 3D printer of Flashforge...

  • Page 2: Kit Contents

    2. Moving parts may cause injury of crushing and scratch, keep your hands naked during operation. Do Not Touch 请勿触摸 2.Heating plate hot during operation. Allow surface to cool before servicing. 使用过程中加热平台会发热，待平台表面冷却后再操作。 This guide only applys to Dreamer 3D printer of Flashforge 3D Technology Dreamer 3D Printer Quick Start Guide Power Cable USB Cable...

  • Page 3: Getting To Know Your Dreamer

    Getting to Know Your Dreamer Read all instructions and notes in the Quick Start Notes Guide and Users Guide before setup and use. Build Plate SD Card Input Extruder Fan X-Axis Guide Rod USB Input Nozzle Timing Belt Power Switch...

  • Page 4: Hardware Assembly

    M3x6 screw with 2.5mm Allen Wrench. Place filament spool onto spool holder with spool being fed from the bottom towards the back of the Dreamer. Lock the filament in place by securing it with the filament spool lock and turning it counter-clockwise.
  • Page 5 The power supply should be switched to reflect your AC output voltage. Failure to do so will cause severe damage to the Dreamer. Please follow the steps below to switch to the correct voltage. For the United States and Canada, the correct voltage to use is 115V.

  • Page 6: Leveling The Build Plate

    Leveling the Build Plate HOME Filament Level Home Jog Mode Setting Monitor About The blue build tape has been pasted on the build plate From the main menu, tap [Tools] and [Level]. The extruder and before leaving factory. (If changing tape is needed, build plate will begin to move to the starting position.

  • Page 7: Loading Filament

    Unload Right Setting Monitor About 1. Remove the lid of the Dreamer; tap the right icon labeled [Tools], then tap [Filament]. Loading Filament 2. Select [Load Left] or [Load Right] as you want. 3. Wait for the extruder to heat up to the operating temperature with an alert.

  • Page 8: First Print

    [OK] to slice and generate Gx file. Copy this Gx file into SD card and insert SD card. Turn on the Dreamer. Ensure the build plate is leveled and load the filament in a right way to ensure the filament is extruding in a straight line.

Table of Contents