Chapter 1. Set Up Your Dreamer; Unpacking Your Dreamer - Flashforge Dreamer Desktop 3D Printer User Manual

____________________________________________________________________________________________

Chapter 1. Set up Your Dreamer

1.1.Unpacking Your Dreamer

We are so grateful for your support to Flashforge by purchasing Dreamer
3D printer and so excited to start the print journey with us. After
15-minute reading and learning, we believe you can making your first 3D
object definitely on your own. When you set up your Dreamer 3D printer,
remember that it was built and packaged carefully at the Flashforge
Factory. We hope you will take your time and be just as carefully
unpacking and getting setup. Let's get started!
1. Put Dreamer package on the clean,
tidy workbench,using a knife to cut the
tape ,then you can see two quick start
guide,which will guide you know our
Dreamer 3D Printer.
2. Remove the top protective foam
pieces, which
Dreamer's lid. Set this aside for now.
The Dreamer unit will then be exposed.
3. Lift the Dreamer by its side openings
and place it on a flat surface. You will
then see the Expert
and USB 2.0 cable
Dreamer User Guide |
also houses the
Kit, power cord,
in the shipping box.
www.ff3dp.com
9
10