Flashforge Dreamer Desktop 3D Printer User Manual page 45

____________________________________________________________________________________________
Printing from SD Card
1. Press [ Print ], and a printing options screen will show up.
2. Make sure that the
settings can be set under
3. Click [ OK ], and save the gcode file in the SD card.
4. FlashPrint will begin slicing the 3D model.
5. After the object is done slicing, take the SD card from the computer.
Insert it into the SD card slot on the Dreamer.
6. Turn on the Dreamer. Make sure the build plate is leveled (page 22)
and filament is loaded on the left extruder (page 19).
7. Press [ Print ]
8. A list of file(s) will show up, press the file that you would like to print,
then press [ Yes
9. The printer will now enter preheating phase and will start printing
once it finishes preheating
Dreamer User Guide |
"Material Left" is selected as "ABS." Advanced
[ More Options ]
and then press the middle
].
www.ff3dp.com
icon.
SD Card icon.
45