Cooling System Schematics; Bearcat/T-Series 1100 Cc (Non-Turbo) - Arctic Cat Sno Pro 120 Service Manual

INSPECTING THERMOSTAT
1. Inspect the thermostat for corrosion, wear, or spring
damage.
2. Using the following procedure, inspect the thermo-
stat for proper operation.
A. Suspend the thermostat in a container filled with
water; then heat the water and monitor the tem-
perature with a thermometer.
B. The thermostat should open at 75° C (167° F).
Once the thermostat starts to open, and allow it to
cool down verifying it has returned to the fully
closed position.
CAUTION
Never heat the thermostat to the fully open position or
damage to the thermostat may occur.
Cooling System
Schematics
The following schematics are representative of the differ-
ent styles of cooling systems in the Arctic Cat snowmo-
biles. Some components may vary from model to model;
therefore, the technician should use discretion and sound
judgment when servicing a particular cooling system.

Bearcat/T-Series 1100 cc (Non-Turbo)

T-Series 1100 cc (Turbo)
F/XF/M 1100 cc (Non-Turbo)
F/XF/M 1100 cc (Turbo)
0744-065
0744-064
3
0746-354
0746-522
3-17