Arctic Cat Sno Pro 120 Service Manual page 425

5. Using a pick, remove the air valve ball from the
nitrogen bladder.
6. Using an Allen-wrench, loosen the nitrogen bladder
half turn.
7. Using Inflation Needle, remove all the nitrogen from
the shock.
8. Using a 5/64-in. Allen-wrench, remove the set screw
from the bearing cap.
9. Using a magnet, remove the bleed ball.
FS145A
10. Using Spanner Wrench, loosen the bearing cap.
FS146
11. Remove the shock rod/piston assembly from the
shock body.
FS147
PC244
PC245
7
PC246
FS151
7-75