Solenoid Roller - Konica Minolta BIZHUB 25E Field Engineering Manual

SOLENOID ROLLER

1. Remove the Cover TX side F. (See "COVER TX SIDE F" on page 5-8.)
2. Remove the harness from the hook [1].
3. Disconnect the junction connector [2].
4. Remove one screw [3].
5. Remove the SOLENOID ROLLER [4].
[ 3 ]
[ 1 ]
[ 2 ]
[ 5 ]
[ 4 ]
CAUTION
When assembling, pass the Pin PK 3×16 of Solenoid roller through the Bracket gear reverse hole [5].
5-10