PEP Modular Computers Modular Computers RS485 User Manual page 34

SMART I/O User's Manual
These libraries for projects, I/O boards, 'C' functions and common data are
extracted by following the described procedure:
• Start Windows if not already started
• Insert diskette Lib/Appli/Help Disk 1/2 into the floppy drive
• Select File from the Windows Program Manager and select Run ...
• Type A:\INSTALL in the command field and select OK
Figure 1.5.3.1 illustrates the Installation Start-up screen.
Figure 1.5.3.1 The Installation Start-up Screen
Page 1 - 22 ©1996 PEP Modular Computers GmbH
Introduction
March 12, 1996