Smadcsetcycliccalib - PEP Modular Computers Modular Computers RS485 User Manual

Chapter 5 Analog Modules

5.2.8.4 SMADCSetCyclicCalib

Syntax
error_code SMADCSetCyclicCalib(u_int8 PortNr, u_int
Description
This function sets the time between two calibration cycles in seconds. If
secs=0, then cyclic calibration is disabled.
Input
u_int8 PortNr
u_int16 secs
Output
error_code
Example
RetVal = SMADCSetCyclicCalib(0 , 120);
March 12, 1996
Port number of module for calibration
(from 0 to 10)
Time in seconds between two calibration
cycles
SUCCESS
If wrong type of module or no module
E_MNF
is fitted on the selected port
or standard OS-9 error code (refer to the OS-9
Technical Manual Error Codes Section).
©1996 PEP Modular Computers GmbH
SMART I/O User's Manual
secs);
5
Page 5 - 41